Journal · Guide

How Do You Buy a Ring When You Don't Know Her Size?

Buy one that adjusts. A band that is open at the back squeezes to fit, a chain at the back draws a ring in or lets it out, and an elastic band stretches over the knuckle. A ring sold in sizes needs her size, and the Gemological Institute of America (GIA) tells jewelers to take a finger size on three different occasions, because fingers swell and contract.

The answer
Choose a ring that adjusts; the product page should say how
Ways it adjusts
Open at the back, a chain at the back, an elastic band
A ring in sizes
Match a ring she already wears; one US size is about 0.8 mm across the inside
Before you pay
Ask whether the ring can be swapped for another size, and by when

What is called a size is a measurement of the inside. ISO 8653, the international standard, defines it as the circumference of the biggest cylinder that fits inside: size 51 is 16.23 millimeters across, about 51 millimeters around. US sizes run on numbers of their own; in GIA's examples, a US 7 is 17.3 millimeters across, and each whole size adds about 0.8 millimeters.

How to choose without her size

  • Read the fit on the product page first: a ring that adjusts should say how.
  • If the ring comes in sizes, size one she already wears on that finger. A jeweler slides it onto a ring stick until it is snug and reads the size where the middle of the band's width touches. Forced on, the reading can be wrong.
  • Match the width. A wide band, over 4 millimeters, has more metal against the skin and fits tighter; it may need half a size to a whole size more than a narrow one, about 0.4 to 0.8 millimeters across the inside, depending on the size of her finger joint and her comfort.
  • Ask before you pay whether the ring can be exchanged for another size, and until what date.

Why a guess misses

The right size depends on two places on the finger: in GIA's words, it is “just loose enough to pass over the finger joint and settle at the position on the finger where the ring will be worn”. In a 2019 study, 36 healthy volunteers had their hands measured at 8 am, 2 pm and 8 pm for three days; their hands swelled overnight and lost volume again over the day. The study measured whole hands rather than ring fingers.

Shape an open band once

An open band adjusts because metal bends and stays bent. Bend a paper clip a long way and let it go, and it stays partly bent. Bending metal that way is cold work. In tests on high-purity copper at the National Bureau of Standards, cold work raised its strength and hardness and materially decreased how far it stretched under tension. Our advice, from that: press an open band in a little at a time until it sits right on her finger, then leave it, rather than working it in and out.

If you want to try it

None of our rings is sold in sizes. The Hoarfrost Band is sterling silver diamond-cut into fine grains from edge to edge and open at the back, and the Beaded Mesh Ring has three rows of tiny beads and a chain at the back that draws it in or lets it out; the rest are among our rings.

Written by the Taton family from the sources listed below. Anything that changes with time carries the date we checked it; the product pages always show what is current.

Sources (5)
  1. Gemological Institute of America — Quality Assurance Benchmark, Accurate Determination of Finger and Ring Sizes · read 12 November 2026
  2. ISO 8653:2016, Jewellery — Ring-sizes — Definition, measurement and designation, second edition (official preview) · read 12 November 2026
  3. Warrender WJ et al., Physiological Nocturnal Hand Swelling, Journal of Hand Surgery, 2019, doi 10.1016/j.jhsa.2018.05.032 · read 12 November 2026
  4. University of Washington, Materials Science and Engineering — Properties of metals · read 12 November 2026
  5. Jenkins WD, Digges TG, Influence of Prior Strain History on the Tensile Properties and Structures of High-Purity Copper, Journal of Research of the National Bureau of Standards 49(3), 1952 · read 12 November 2026
Shop Rings